
Block Pillar and Colorbond Fence, Penrith
At this home in Penrith, we fitted charcoal Colorbond panels between the block pillars along the front boundary. The panels sit above the timber sleeper wall that runs along the garden, so the fence now looks like one continuous run from end to end.
Before: The Problem with the Old Boundary
The pillars and sleeper wall were already in place, with old timber paling infills between them. Over the years the palings had weathered to grey and gaps had opened up between the boards, so the boundary looked tired next to the pale pillars and the yard wasn't as private from the street as it should be.

How We Finished the Fence
We started by stripping the old palings and rails out of each bay and taking them away, leaving a clean opening between every pair of pillars. Because the pillars are set by hand, no two gaps are quite the same, so we measured every bay on its own before cutting anything.
Colorbond fencing suits this kind of job because the sheets can be cut to length and still give a matching finish in every bay. We fixed channels to the sides of each pillar, cut the sheets to fit and set them above the sleeper wall, which keeps the timber as the base of the fence and gives it a clean bottom line.

Charcoal panels against the pale pillars give this block pillar fence a crisp, modern look, and the solid sheeting blocks the view into the yard. Unlike the old palings, Colorbond won't grey, warp or rot. Once the last bay was in, we cleaned up the offcuts and left the verge tidy.

The owners now have a front yard that's private from the street, behind a fence that suits the home and needs nothing more than the odd wash to keep it looking good.
Planning a New Front or Side Fence?
Whether you're filling the gaps between existing pillars or starting from scratch, Bikram and the team can help you choose fencing in Penrith that suits your home. Call (02) 4703 9959 or request a free quote.





